Verification Code Fields

The available fields for the Verification Code form are as follows:

If you want to add custom text to your form, select the Add Custom Text button.

The Text dialog box displays.

To define the custom text, complete the following steps:

• Text This defines a text field. The following default Text fields can be defined: These can be updated in the same way. To define the text, complete the following steps: You can remove this field as follows:
  • A message with a code has been sent…
  • Enter the code in the box below
  1. Select the three dots at the end of the Text row
  2. Select Edit . The Text dialog box displays.
  3. Enter the text you want to display in the text box.
     Note: If you want to format the text, for example to include a heading or a list, use the formatting bar at the top of the text box.
  4. Select the Save button to save your changes and return to the Login screen.
     You can remove this field as follows:

     1. Select the three dots at the end of the Text row.
     2. Select Delete. The field is deleted immediately.

• Email Address This displays a field in which the end user can enter their email address To edit the text displayed, complete the following steps:

  1. Select the three dots at the end of the row
  2. Select Edit . The Enter Email Address dialog box displays. At the top of the Enter Email Address dialog box, you can see a representation of the email address field as it appears in your form.
  3. Enter the label you want to display above the email address field in your form in the Input Box Label Text text box.
  4. Enter the text you want to display in the email address field in your form in the Placeholder Text text box.
  5. Select the Save button to save your changes and return to the Email Address screen.
• Enter Code This defines the enter code field. To define the enter code field, complete the following steps:
  1. Select the three dots at the end of the row
  2. Select Edit . The Enter Code dialog box displays. At the top of the Enter Code dialog box, you can see a representation of the enter code field as it appears in your form.
  3. Enter the label you want to display above the enter code field in your form in the Code Label Text text box. By default, this is pre-filled with Code.
  4. Enter the text you want to display in the enter code field in your form in the Placeholder text box. By default, this is pre-filled with e.g. 350271.

  5. Enter the text you want to display to allow the user to request that the verification code is sent again in the Resend Text text box. By default, this is pre-filled with Didn’t get a code?

  6. Enter the text you want to display when the text is sent in the Code Resent Message text box. By default, this is pre-filled with Resent!
  7. Select the Save button to save your changes and return to the Login screen.
  1. Enter the text you want to display in the text box.
     Note: If you want to format the text, for example to include a heading or a list, use the formatting bar at the top of the text box.
  2. Select the Save button to save your changes and return to the Email Address screen.

Forgot Password Field

The available fields for the Forgot Password form are as follows:

• Text This defines a text field. The following default Text fields can be defined: These can all be updated in the same way. To define a text field, complete the following steps: You can remove this field as follows:
  • Reset your password
  • A message with a code was sent to…
  • Enter the code in the box below.
  1. Select the three dots at the end of the Text row.
  2. Select Edit The Text dialog box displays.
  3. Enter the text you want to display in the text box.
     Note: If you want to format the text, for example to include a heading or a list, use the formatting bar at the top of the text box.
  4. Select the Save button to save your changes and return to the Login screen.
     You can remove this field as follows:

     • Select the three dots at the end of the Text row.
     • Click Delete. The field is deleted immediately.

• Email Address This displays a field in which the end user can enter their email address To edit the text displayed, complete the following steps:

  1. Select the three dots at the end of the row

  2. Select Edit . The Enter Email Address dialog box displays. At the top of the Enter Email Address dialog box, you can see a representation of the email address field as it appears in your form.

  3. Enter the label you want to display above the email address field in your form in the Input Box Label Text text box.
  4. Enter the text you want to display in the email address field in your form in the Placeholder Text text box.
  5. Select the Save button to save your changes and return to the Email Address screen.

• Enter Code This defines the enter code field. To define the enter code field, complete the following steps:

  1. Select the three dots at the end of the row.
  2. Select Edit . The Enter Code dialog box displays. At the top of the Enter Code dialog box, you can see a representation of the enter code field as it appears in your form.
  3. Enter the label you want to display above the enter code field in your form in the Code Label Text text box. By default, this is pre-filled with Code
  4. Enter the text you want to display in the enter code field in your form in the Placeholder text box. By default, this is pre-filled with e.g. 350271.
  5. Enter the text you want to display to allow the user to request that the verification code is sent again in the Resend Text text box. By default, this is pre-filled with Didn’t get a code?
  6. Enter the text you want to display when the text is sent in the Code Resent Message text box. By default, this is pre-filled with Resent!
  7. Select the Save button to save your changes and return to the Login screen.
• Divider This defines the divider used in your form. To define the divider, complete the following steps:
  1. Select the three dots at the end of the row
  2. Select Edit . The Divider dialog box displays. At the top of the Divider dialog box, you can see a representation of the divider as it appears in your form.
  3. Update the text in the Divider Text text box
  4. By default, the Divider line checkbox is selected. This displays a line either side of your defined text. To remove the lines, deselect the Divider line checkbox.
  5. Select whether to display or hide the divider from the Visibility radio buttons. The options are as follows:
     • Show
     • Hide
  6. Select the Save button to save your changes and return to the Email Address screen.
• Button (Continue) This displays the Continue button, which your end user can use to move to the next step in the form To define the text used on the button, complete the following steps:
  1. Select the three dots at the end of the row
  2. Select Edit . The Button dialog box displays. At the top of the Button dialog box, you can see a representation of the button as it appears in your form.
  3. Update the text in the Button Text text box.
  4. Select the Save button to save your changes and return to the Email Address screen.

Reset Password Fields

The available fields for the Reset Password form are as follows:

• Text This defines a text field. To define the text, complete the following steps: You can remove this field as follows:
  1. Select the three dots at the end of the Text row.
  2. Select Edit .The Text dialog box displays.
  3. Enter the text you want to display in the text box.
     Note: If you want to format the text, for example to include a heading or a list, use the formatting bar at the top of the text box.
  4. Select the Save button to save your changes and return to the Login screen.
  1. Select the three dots at the end of the row.
  2. Select Delete . The field is deleted immediately.
• Password - This defines the field that allows the end user to specify their password. To edit the text displayed, complete the following steps:
  1. Select the three dots at the end of the row.
  2. Select Edit . The Password dialog box displays. At the top of the Password dialog box, you can see a representation of the email address field as it appears in your form.
  3. Enter the label you want to display above the email address field in your form in the Password Input Label text box. By default, this is pre-filled with Password
  4. Enter the text you want to display in the password field in your form in the Password Input Placeholder text box.
  5. Enter the text to display in the link, which allows the end user to display their password as it is entered, in the Show Text text box. By default, this is pre-filled with Show.
  6. Enter the text to display in the link, which hides the password as it is entered, in the Hide Text text box. By default, this is pre-filled with Hide.
  7. Select the Save button to save your changes and return to the Login screen.
• Button (Submit) - This defines the Submit button. To define the text used on the button, complete the following steps:
  1. Select the three dots at the end of the row
  2. Select Edit . The Button (Submit) dialog box displays. At the top of the Button (Submit) dialog box, you can see a representation of the button as it appears in your form.
  3. Update the text in the Button Text text box.
  4. Select the Save button to save your changes and return to the Login screen.